General |
Year
|
2022
|
2022
|
Manufacturer
|
Aprilia®
|
Aprilia®
|
Model Name
|
RSV4 Factory 1100
|
RSV4 Factory 1100
|
Trim Name
|
Base
|
Base
|
Generic Type (Primary)
|
Sport
|
Sport
|
Engine |
Engine
|
Aprilia 4 longitudinal 65° V4 cylinder, 4-strokes, liquid cooling system, double overhead camshaft (DOHC), four valves per cylinder
|
Aprilia 4 longitudinal 65° V4 cylinder, 4-strokes, liquid cooling system, double overhead camshaft (DOHC), four valves per cylinder
|
Displacement
|
1.099 cc
|
1.099 cc
|
Bore
|
81 mm
|
81 mm
|
Stroke
|
53.32 mm
|
53.32 mm
|
Compression Ratio
|
13.6:1
|
13.6:1
|
Engine Power
|
217 HP (159.5 kW) at 13,000 rpm
|
217 HP (159.5 kW) at 13,000 rpm
|
Engine Torque
|
125 Nm at 10,500 rpm
|
125 Nm at 10,500 rpm
|
Fuel Economy: Combined City/Hwy
|
6.90 litres/100 km
|
6.90 litres/100 km
|
Emissions
|
Euro 5 | CO2: 160 g/km
|
Euro 5 | CO2: 160 g/km
|
Power System Type
|
Supply: Airbox with front dynamic air intakes. 4 Marelli 48-mm throttle bodies with 8 injectors and Ride-By-Wire engine management.
|
Supply: Airbox with front dynamic air intakes. 4 Marelli 48-mm throttle bodies with 8 injectors and Ride-By-Wire engine management.
|
Drivetrain |
Clutch
|
Multi plate wet clutch with mechanical slipper system
|
Multi plate wet clutch with mechanical slipper system
|
Transmission
|
6-speed cassette type gearbox Gear lever with Aprilia Quick Shift electronic system (AQS)
|
6-speed cassette type gearbox Gear lever with Aprilia Quick Shift electronic system (AQS)
|
Primary Drive
|
Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659)
|
Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659)
|
Drivetrain
|
Secondary: Chain: Drive ratio: 41/16 (2,562)
|
Secondary: Chain: Drive ratio: 41/16 (2,562)
|
Traction Control System
|
Management: (AEM), engine brake control (AEB), traction control (ATC), wheelie control (AWC), launch control (ALC), cruise control (ACC), speed limiter (APT). 6 riding modes (3 Road, 3 Track)
|
Management: (AEM), engine brake control (AEB), traction control (ATC), wheelie control (AWC), launch control (ALC), cruise control (ACC), speed limiter (APT). 6 riding modes (3 Road, 3 Track)
|
Chassis |
Chassis
|
Aluminium dual beam chassis with pressed and cast sheet elements Available adjustments: headstock position and angle, engine height, swingarm pin height Smart EC 2.0 electronically managed Öhlins steering damper
|
Aluminium dual beam chassis with pressed and cast sheet elements Available adjustments: headstock position and angle, engine height, swingarm pin height Smart EC 2.0 electronically managed Öhlins steering damper
|
Suspension |
Front Suspension
|
Smart EC 2.0 electronically managed Öhlins NIX fork. 43 mm stanchions, with TIN surface treatment Aluminium radial calliper mounts, adjustable in hydraulic compression and rebound damping and spring pre-load,
|
Smart EC 2.0 electronically managed Öhlins NIX fork. 43 mm stanchions, with TIN surface treatment Aluminium radial calliper mounts, adjustable in hydraulic compression and rebound damping and spring pre-load,
|
Rear Suspension
|
Upside-down double braced aluminium swingarm; Öhlins TTX monoshock with Smart EC 2.0 electronically managed piggyback, fully adjustable in: spring pre-load, wheelbase and hydraulic compression and rebound damping.
|
Upside-down double braced aluminium swingarm; Öhlins TTX monoshock with Smart EC 2.0 electronically managed piggyback, fully adjustable in: spring pre-load, wheelbase and hydraulic compression and rebound damping.
|
Front Travel (in./cm.)
|
125 mm
|
125 mm
|
Rear Travel (in./cm.)
|
115 mm
|
115 mm
|
Brakes |
Front braking system
|
Dual 330-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo Stylema® monobloc radial callipers with 4 30 mm opposing pistons. Sintered pads. Radial pump and metal braided brake hose
|
Dual 330-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo Stylema® monobloc radial callipers with 4 30 mm opposing pistons. Sintered pads. Radial pump and metal braided brake hose
|
Rear braking system
|
220 mm diameter disc; Brembo calliper with two 32 mm separate pistons. Sintered pads. Pump with integrated tank and metal braided hose Bosch ABS with cornering function and 3 map settings, equipped with RLM (Rear wheel Lift-up Mitigation) strategy
|
220 mm diameter disc; Brembo calliper with two 32 mm separate pistons. Sintered pads. Pump with integrated tank and metal braided hose Bosch ABS with cornering function and 3 map settings, equipped with RLM (Rear wheel Lift-up Mitigation) strategy
|
Wheels & Tires |
Front Wheel
|
Forged aluminium alloy wheels, completely machined, with 5 split spoke design. / 3.5”x17”
|
Forged aluminium alloy wheels, completely machined, with 5 split spoke design. / 3.5”x17”
|
Rear Wheel
|
Forged aluminium alloy wheels, completely machined, with 5 split spoke design. / 6”x17”
|
Forged aluminium alloy wheels, completely machined, with 5 split spoke design. / 6”x17”
|
Front Tire
|
Radial tubeless 120/70 ZR 17
|
Radial tubeless 120/70 ZR 17
|
Rear Tire
|
Radial tubeless 200/55 ZR 17 (alternative: 190/50 ZR 17; 190/55 ZR 17)
|
Radial tubeless 200/55 ZR 17 (alternative: 190/50 ZR 17; 190/55 ZR 17)
|
Dimensions |
Wheelbase
|
1435.8 mm
|
1435.8 mm
|
Length
|
2055 mm
|
2055 mm
|
Width
|
735 mm
|
735 mm
|
Height
|
Saddle: 845 mm
|
Saddle: 845 mm
|
Trail
|
104.5 mm
|
104.5 mm
|
Dimensions
|
Headstock angle: 24.6°
|
Headstock angle: 24.6°
|
Capacities |
Fuel Capacity
|
17.9 litres (including 4-litre reserve)
|
17.9 litres (including 4-litre reserve)
|
Weights |
Curb Weight
|
202 kg (90% fuel)
|
202 kg (90% fuel)
|
Features |
Features
|
Controls: APRC system (Aprilia Performance Ride Control) that includes engine maps
|
Controls: APRC system (Aprilia Performance Ride Control) that includes engine maps
|
|
|
|